10.oz DOWSIL 790 Silicone Building Sealant
$14.29
These multipurpose silicone caulks and sealants fill gaps, holes, and seams in a variety of applications that use common building materials.Dowsil 790 (formerly Dow Corning 790) silicone building sealant is comprised of a one-part silicone formula that cures in the presence of moisture in the atmosphere that produces a durable, fire-resistant, pliable and ultra-low-modulus silicone rubber building joint seal. Dow 790 has excellent weathering properties and resists usually harmful sunlight, rain, snow, and temperature extremes. This product does not need priming to substrates such as concrete and masonry and is easily applied within a very broad temperature range. Dow 790 silicone is an ultra-low-modulus sealant for both new and existing construction joint sealing applications. For driveways, recess sealant 1/8" from surface.
Color
Quantity
Specifications
- Stone
- Concrete
- Masonry
- Granite - solvent wipe (isopropanol alchohol)
- Marble - 1200OS primer required
- Travertine - 1200OS primer required
- Limestone - 1200OS primer required
- Sandstone - 1200OS primer required
- Aluminum - 1200OS primer required
- Stainless steel - 1200OS primer required
- Galvanized steel - 1200OS primer required
- Cold rolled steel - 1200OS primer required
- PVC - 1200OS primer required
- Painted substrates
- Glass - solvent wipe (isopropanol alchohol)
- Construction joints
- Expansion joints
- Control joints
- Exterior Insulation and Finish Systems (EIFS) joints
- Curtainwall joints
- Mullion joints
- Stone pavers
- Driveways
- In structural applications.
- Below grade or to materials that outgas, which can cause bubbling in curing sealant.
- On brass or copper or other similar material that can be corroded.
- To surfaces that are continuously immersed in water.
- For use as an interior penetration fire-stop sealing system.
- To building materials that bleed oils, plasticizers, or solvents
- Materials such as impregnated wood, oil based caulks, green or partially vulcanized rubber gaskets, tapes or bituminous below-grade waterproofing and asphalt-impregnated fiberboard.
- In totally confined spaces since the sealant requires atmospheric moisture for adequate curing
- To surfaces that will be painted after application. The paint film will not stretch with the extension of the sealant and may crack, peel and most likely will not adhere to the sealant adequately.
- To surfaces in direct or indirect contact with food.
- To wet or frost-laden surfaces.
- In applications where solvents or primers are not fully dried prior to sealant application. Uncured sealant is very sensitive to many solvents, primers, and cleaning agents; these may cause the sealant to remain uncured or tacky.
Applications
Limitations
| Brand | Dow |
|---|---|
| Series | 790 |
| Container Size | 10.3 fl. oz. |
| Container Type | Cartridge |
| Composition | Ultra low modulus, self-primed silicone building sealant |
| Paintable | No |
| Primer needed | No to most substrates |
| Full adhesion | 14-21 days |
| Tack-free time | 60 minutes; 50%RH |
| Curing time | 7 - 14 days at 77 degrees F at 50% RH |
| Working time | 10 - 20 minutes |
| Peel strength | 25 ppi |
| Tensile strength | 15 psi at 25% extension; 20 psi at 50% extension |
| Tensile strength maximum | 100 psi |
| Shelf life | 12 months from date of manufacture |